Schweitzer Engineering Laboratories SEL-700GT - Page 9

viiList of Tables
Date Code 20170814 Instruction Manual SEL-700G Relay
Table 4.80 Rear-Panel DeviceNet Port Settings...................................................................................4.223
Table 4.81 Display Point and Local Bit Default Settings .................................................................... 4.223
Table 4.82 LCD Display Settings.........................................................................................................4.223
Table 4.83 Settings That Always, Never, or Conditionally Hide a Display Point ............................... 4.225
Table 4.84 Entries for the Four Strings................................................................................................ 4.225
Table 4.85 Binary Entry in the Name String Only............................................................................... 4.227
Table 4.86 Analog Entry in the Name String Only..............................................................................4.228
Table 4.87 Entry in the Name String and the Alias Strings ................................................................. 4.229
Table 4.88 Example Settings and Displays..........................................................................................4.229
Table 4.89 Target LED Settings ........................................................................................................... 4.232
Table 4.90 Pushbutton LED Settings ................................................................................................... 4.233
Table 4.91 Auto-Removal Settings ...................................................................................................... 4.234
Table 4.92 SER Trigger Settings.......................................................................................................... 4.235
Table 4.93 Enable Alias Settings ......................................................................................................... 4.235
Table 4.94 SET R SER Alias Settings .................................................................................................4.236
Table 4.95 Event Report Settings.........................................................................................................4.236
Table 4.96 Generator Autosynchronism Report Settings..................................................................... 4.236
Table 4.97 Generator Autosynchronism Report Data.......................................................................... 4.237
Table 4.98 Load Profile Settings.......................................................................................................... 4.237
Table 4.99 DNP Map Settings.............................................................................................................. 4.237
Table 4.100 User Map Register Settings ...............................................................................................4.238
Table 5.1 Measured Fundamental Meter Values.................................................................................... 5.3
Table 5.2 Thermal Meter Values............................................................................................................ 5.5
Table 5.3 RTD Input Status Messages ................................................................................................... 5.5
Table 5.4 Maximum/Minimum Meter Values........................................................................................5.7
Table 5.5 RMS Meter Values................................................................................................................. 5.9
Table 5.6 Demand Values..................................................................................................................... 5.11
Table 5.7 Synchrophasor Measured Values ......................................................................................... 5.12
Table 5.8 Measured Differential Meter................................................................................................ 5.13
Table 5.9 Measured Harmonic Meter Values.......................................................................................5.13
Table 5.10 Breaker Maintenance Information for a 25 kV Circuit Breaker .......................................... 5.15
Table 5.11 Breaker Monitor Settings ..................................................................................................... 5.16
Table 5.12 Breaker Monitor Output....................................................................................................... 5.24
Table 6.1 Methods of Accessing Settings .............................................................................................. 6.1
Table 6.2 SHOW Command Options..................................................................................................... 6.4
Table 6.3 SET Command Options .........................................................................................................6.4
Table 6.4 SET Command Editing Keystrokes........................................................................................ 6.5
Table 6.5 SET Command Format...........................................................................................................6.5
Table 6.6 Setting Interdependency Error Messages............................................................................... 6.6
Table SET.1 Port Number Settings That Must be Unique................................................................... SET.51
Table 7.1 SEL-700G Communications Port Interfaces..........................................................................7.1
Table 7.2 EIA-232/EIA-485 Serial Port Pin Functions......................................................................... 7.8
Table 7.3 Protocols Supported on the Various Ports............................................................................ 7.10
Table 7.4 Settings Associated With SNTP...........................................................................................7.13
Table 7.5 Serial Port Automatic Messages ..........................................................................................7.15
Table 7.6 Command Response Header Definitions ............................................................................. 7.18
Table 7.7 Access Commands ...............................................................................................................7.18
Table 7.8 ANALOG Command ........................................................................................................... 7.20
Table 7.9 ANALOG Command Format............................................................................................... 7.20
Table 7.10 COM Command................................................................................................................... 7.25
Table 7.11 CONTROL Command ......................................................................................................... 7.25
Table 7.12 Three Remote Bit States.......................................................................................................7.25
Table 7.13 COPY Command..................................................................................................................7.26
Table 7.14 COUNTER Command ......................................................................................................... 7.26
Table 7.15 Date Command..................................................................................................................... 7.26
Table 7.16 EVENT Command (Event Reports)..................................................................................... 7.27
Table 7.17 EVENT Command Format...................................................................................................7.28
Table 7.18 FILE Command.................................................................................................................... 7.28