Schwinn 810 - Page 37

37
Results / Cool Down Mode
AllworkoutsexceptQuickStartandtheHeartRateControlprogramshavea3minuteCoolDownperiod.DuringthisCool
Down period, the Console shows the Workout Results. The Console will cycle through the workout results every 2 sec-
onds while counting down the remaining time of the Cool Down period.
Note: The Cool Down values are not added to Workout Result values.
During the Cool Down period, the incline setting of the walking belt will adjust to zero. Push PAUSE/STOP to end the Cool
Down period. After the Cool Down period, the Console will show the Workout Results for an additional 5 minutes. Push
PAUSE/STOP to end the Results Mode and go back to Power-Up Mode. If there is no input to the Console for 5 minutes,
the Console automatically goes into Sleep Mode.