Before Assembly
Select the area where youare goingto set up and operate your machine. For safe operation, the location must be on a hard, level
surface. Allow a workout area of minimum 201"x 71" (5.1mx 1.8m).
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left
(counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through
the holes.
5. The assembly requires 2 people.
Note: Thetreadmill isdesignedto plug into a grounded, non-6FI outlet only. Do not connect the treadmill to a 6FI
outlet. Todetermine if your outlet or circuit breaker is 6FI, look for atest and reset button onthem. Ifthey
havethe test and reset button, it isa 6FI outlet or circuit breaker.
To Next Page
Loading...
