Schwinn Rower - Page 24

24
Condition/Problem Things to Check Solution
Check batteries. Make sure batteries are installed correctly. If batteries are
correctly installed, replace with a set of new batteries.
Check RPM Sensor
Magnetposition(requires
seatremoval)
RPM Sensor Magnet should be in place on Seat slider frame.
Check RPM Sensor
Assembly
RPM Sensor Assembly should be aligned with magnet and
connected to data cable. Realign sensor if necessary. Replace
if there is any damage to the sensor or the connecting wire.
Contact your local distributor for further assistance.
Unit rocks/does not sit
level
Check level adjustment Level adjustment knob may be turned to level machine.
Check surface under unit Adjustmentmaynotbeabletocompensateforextremelyun-
even surfaces. Move machine to level area.
Seat Rail locking pin does
notengage(SeatRailin
horizontalposition)
Level adjustment knob Turn the level adjustment knob until the Seat Rail locking pin
engages the support tube.
Seat rolls unevenly Seat roller adjustment
hardware
Turn the adjustment nuts under the seat to adjust the seat
rollers.