Folding & Moving Your
Schwinn Comp
Folding and moving your Schwinn Comp is easy. Follow the
simple steps below to fold your Schwinn Comp. Once it’s
folded, simply tilt the machine back on its transport wheels
and roll it to any location
1. Lock the seat and bench into the flat position using the
spring lock pin.
2. Remove all Power Rod resistance and then bind the Power
Rods with the rod binding strap.
3. Remove the threaded knob on the sliding seat rail.
4. Tilt the bench toward the Power Rods.
5. Screw the threaded knob into the end of the standing plat-
form.
Maintenance and Care of
Your Schwinn Comp
Your Schwinn Comp requires very little maintenance. To keep
your Schwinn Comp in top condition check all fasteners and
rod caps before each workout and tighten as needed.
Clean the bench with a non abrasive cleaner after each use.
This will keep it looking new. Any non abrasive household
cleaner or soap works well. Many automotive interior cleaners
make surfaces too “slick” and should not be used.
If you have any questions regarding maintenance
please contact your local Schwinn Fitness Dealer.
Using Your Machine
5
3
2
5
4
1
To Next Page
Loading...
