To Next Page
B
Bryan BuckSep 10, 2025
Why are SciCan hydrim c51w Washer wash arms not rotating?
- Jjamie85Sep 10, 2025
If the wash arms of your SciCan Washer are not rotating, remove the wash arms, clean them, and then reinstall them.
Why are SciCan hydrim c51w Washer wash arms not rotating?
If the wash arms of your SciCan Washer are not rotating, remove the wash arms, clean them, and then reinstall them.
What causes CF4 Water evacuation failure in SciCan hydrim c51w Washer?
If your SciCan Washer displays a CF4 Water evacuation failure, check that the drain hose is not kinked and ensure that the filters in the bottom of the chamber are not obstructed.
What to do if SciCan Washer displays CF15 Chamber overflow?
If your SciCan Washer displays a CF15 Chamber overflow, check if the drain is blocked. If the issue persists, call for service.
What does error light flashing four times mean on SciCan hydrim c51w Washer?
If the Error light on your SciCan Washer flashes four times, it indicates that water is failing to leave the unit. Check the exhaust tube for kinks and ensure it is connected to an unblocked drain.
What does error light flashing twice mean on SciCan hydrim c51w?
If the Error light on your SciCan Washer flashes twice, it means the unit has failed to fill with water.
What does error light flashing three times mean on SciCan hydrim c51w?
If the Error light on your SciCan Washer flashes three times, it indicates that the water temperature reading has failed.
How to fix SciCan hydrim c51w Washer upper wash arm that does not rotate?
If the upper wash arm of your SciCan Washer does not rotate with ease, remove the upper wash arm and clean it, and also clean the upper wash arm collar.
Why does SciCan hydrim c51w Washer show a “printing” message with no printer?
If your SciCan Washer displays a “printing” message at the end of the cycle but no printer is attached, go to the Setup Menu, then Printer / USB setup (section 5.11) and ensure that “serial” is selected.
What to do if SciCan hydrim c51w door cannot be opened?
If the door of your SciCan Washer cannot be opened, it might be because the cycle is not complete or the cycle was aborted and the unit has not finished draining. Wait for the cycle to complete or the unit to drain.
What to do if SciCan Washer shows “No detergent” message?
If you receive a “No detergent” message on your SciCan Washer even when there is still chemical left in the container, check the chemical tubing for any kinks and loosen the screw cap on the chemical bottle.
Operating Environment| maximum relative humidity | 80% for temp up to 31˚C |
|---|---|
| maximum relative humidity for higher temperature | 50% for temp up to 40˚C |
| operating temperature range | -5˚C to 40˚C |
| maximum altitude | 2000m |
Power| north america voltage | 208-240 V 60 Hz 10 A |
|---|---|
| europe voltage | 220-240 V 50 Hz 10 A |
| mains supply tolerance | + / -10% of nominal |
Other Specifications| running noise | 60 dBA |
|---|---|
| hot water connection temperature | 50-70˚C |
| rinse aid dispenser capacity | 60 ml |
| water softener salt capacity | 0.5 kg |
| filling system safety maximum | 3.5 L |
| wash temperature | 50˚C +/- 5˚C |
| drying system heater | 1 kw |
Weight and Dimensions| height | 475 mm |
|---|---|
| width | 600 mm |
| depth | 460 mm |
| depth with door open | 780 mm |
| weight | 34 kg |
