SciCan HYDRIM L110w Quick Reference Guide

HYDRIM
®
L110 w
Quick Reference Guide
Successful Instrument Washing
• Remove composite, cement and amalgam at chairside
• Do not put burs in Hydrim
• Do not allow instruments to dry for longer than one hour before
processing in Hydrim
• Load cassettes and baskets according to manufacturer’s guidelines.
Do not overload.
• For cassettes and hinged instruments, use the heavy-duty cycle
• Place small / light items in the basket with lid
• Do not put anodized aluminum instruments in Hydrim
How to Use Hydrim
1. Turn the machine ON
2. Touch the screen to begin
3. Touch the unlock symbol
4. Load instruments / cassettes into the machine
5. Close the door
6. Touch the desired cycle. The door will be locked during the cycle.
7. When the “cycle complete” message appears, touch the unlock
symbol and unload.

SciCan HYDRIM L110w Specifications

External Dimensions

height (free standing)	850 mm
height (built in)	810 mm
width	600 mm
depth	600 mm
depth with door open	1143 mm

Chamber Dimensions

chamber height	609 mm
chamber width	388 mm
chamber depth	483 mm

Weight and Noise

weight	85 kg
running noise	50 dB

Plumbing

supply hoses diameter	2 cm
hot/cold water connection	[3]/4" garden hose
flexible drain hose	2 cm [3]/4" barb inlet

Electrical Consumption

voltage	208 - 240 V
frequency	60 Hz
current	15 A
rated load	2.5 kW

Operating Environment

pollution degree	2
installation category	II
maximum relative humidity at 31˚C	80 %
maximum relative humidity at 40˚C	50 %