SciCan HYDRIM L110w Installation Guide

Page 1
HYDRIM L110w Installation Guide
Installation
Dimensions:
Height (free-standing) 850 mm / 33.5"
Height (built-in) 810 mm / 32"
Width 600 mm / 23.75"
Depth 600 mm / 23.75"
Depth with Door Open 1143 mm / 45"
Weight 85 kg / 187 lbs
Running Noise 58 dB wash
78 dB dry
Hot Water Connection 60˚C max / 158˚F
Rinse aid dispenser 80 ml / 2.7 U.S. fl. oz. capacity
Water softener 1.0 kg / 2.2 lbs salt capacity
Filling system 4.5 L / 135 U.S. fl. oz. capacity
Wash Temperature 50˚C / 122˚F
Rinse and hold 30˚C / 86˚F
Electrical Consumption:
North America 208 - 240 V 60 Hz 15 A
Rated Load 2.5 kW
Other:
Equipment Pollution Degree 2
Equipment Installation Category II
Maximum relative humidity 80 % for temp. up to 31˚C / 88˚F
50 % for temp. up to 40˚C / 104˚F
Mains supply + / - 10 % of nominal
Operating mode Free-standing or Built in
Specifications
Hydrim L110w instrument washer:

SciCan HYDRIM L110w Specifications

External Dimensions

height (free standing)	850 mm
height (built in)	810 mm
width	600 mm
depth	600 mm
depth with door open	1143 mm

Chamber Dimensions

chamber height	609 mm
chamber width	388 mm
chamber depth	483 mm

Weight and Noise

weight	85 kg
running noise	50 dB

Plumbing

supply hoses diameter	2 cm
hot/cold water connection	[3]/4" garden hose
flexible drain hose	2 cm [3]/4" barb inlet

Electrical Consumption

voltage	208 - 240 V
frequency	60 Hz
current	15 A
rated load	2.5 kW

Operating Environment

pollution degree	2
installation category	II
maximum relative humidity at 31˚C	80 %
maximum relative humidity at 40˚C	50 %