SciCan STATIM 2000/S - Service Manual

www.scican.com
• Rev. 7.0 Service Manual
Rev. 7.0 Service Guide 06-TSB-236
Copyright 2006 SciCan. All rights reserved.
STAT IM 2000/S & 5000/S
C a s s e t t e A u t o c l a v e ™
Statim 7.0 2000_5000 Cover 1/9/07 10:04 AM Page 1

Summary

Statim Non-S Calibration

Validation Thermocouple Calibration

Procedure for calibrating the validation thermocouple.

Statim S-Class Calibration

Chamber Calibration (Temperature and Pressure)

Procedure to calibrate chamber temperature and pressure.

Statim Data Logger Quick Setup Guide

PCB Rev. 7.0 Assembly Instructions

PCB 7 Replacement Kits ST5000;S

PCB 7 Replacement Kits ST2000;S

Statim Autoclave Conductivity Circuit Calibration

Statim Rev. 7 PCB User and Service Menus

User Setup Menu

Access to user-configurable settings and options.

Service Menu

Access to advanced maintenance and diagnostic functions.

Statim 2000 Troubleshooting: Cycle Faults

Statim 2000 Troubleshooting: Printer Messages

Statim 2000 Troubleshooting: Conductivity Sensor Problems

Statim 2000 Troubleshooting: Original Error Codes

Statim 5000 Troubleshooting: Cycle Faults

Statim 5000 Troubleshooting: Printer Messages

Statim 2000 S;5000 S Troubleshooting: Cycle Faults

Statim Data Logger Troubleshooting

Printer Interface Board rev 4.x Installation Instruction

SciCan STATIM 2000/S Specifications