16
SCIENTECH CALIBRATION SERVICE
The Astral™ AI310 power meters and calorimeters are calibrated at Scientech’s authorized service
center and the calibration constants were provided with the detector.
Scientech detectors include a NIST traceable calibration certificate, to document that you are getting the
most accurate laser measurement possible.
An optimum calibration of each detector is ensured by Scientech’s highly trained and skilled service
team. Excessive energy or peak power density can damage a detector. Safe operating limits are specified
in the detector specifications. If your calculated energy or peak power conditions exceed those specified
for the model, optical attenuation may be used as a solution.
Electric substitution heater coils are available as an option that allows customer to perform their own
field calibration. These electric heaters are only available for new detector purchases only by adding an
“H” to the end of the detector part number when placing an order.
Scientech recommends that a complete calibration be performed annually to verify system accuracy.
Please visit Scientech’s website at www.scientechinc.com to obtain an RMA (returned material
authorization) number and complete the form noting that you are requesting calibration of your detector.
You may also contact our Product Service Department at (800)525-0522 or (303)444-1361 or Fax
(303)444-9229 or email inst@scientechinc.com. Be prepared to provide model number, serial number
along with contact information. to arrange for a NIST traceable, factory calibration. Scientech calibrates
the detector with its power meter for the same price.
LIMITED WARRANTY
Scientech warrants and represents that the laser power measurement product will be free from defects in
design, materials and workmanship and conform with applicable Scientech product specifications for a
period of three (3) years. The product warranty period begins on the date of shipment from Scientech.
Scientech warrants that its products shall conform to applicable Scientech specifications and drawings
and will meet all the functional and performance requirements when properly installed, operated, and
maintained in accordance with Scientech’s operating manual. Warranty does not extend to any Scientech
products that have been subjected to misuse, abuse, or accidents, or improper installation, maintenance
or applications, repaired by unauthorized personnel, or Products in which the tamper proof sticker has
been removed or broken.
During the warranty period, Scientech will repair, or at its option replace at no charge, components that
prove to be defective. The product must be returned, shipping prepaid, to Scientech's authorized repair
facility. Products repaired by Scientech’s authorized repair personnel/facilities will be warranted against
defects in the repaired component and workmanship for a period of 365 days from the date of shipment
of the repaired Product.
To Next Page
Loading...
