SPECIFICATIONS
SCIFIT Scientic Solutions For Fitness SCIFIT Scientic Solutions For Fitness SCIFIT
Step 1:Place one hand on the back
of the seat cushion back support.
Step 2: Use the other hand to pull upward and hold the
yellow adjustment knob located on the front of the seatpost.
Step 3: Slide the seat assembly backwards until it is
completely off of the machine seat track.
Step 1:Place one hand on the back
of the seat cushion back support.
Step 2: Use the other hand to pull upward and hold the
yellow adjustment knob located on the front of the seatpost.
Step 3: Slide the seat assembly forward or backwards on the
machine seat track to the desired position.
The seat can be adjusted in 25.4mm increments and is held
in place with a spring loaded pin. This is done by using the
round yellow knob at the front of the seat assembly.
To Next Page
Loading...
