Scilogex SK-R1807-E User Manual

!
!
Rocking Shaker & 3D Shaker
User Manual
SK-R1807-E
Analog Rocking Shaker
SK-D1807-E
Analog 3D Shaker
SK-R1807-S
LED Digital Rocking Shaker
SK-D1807-S
LED Digital 3D Shaker
Please read the User Manual carefully before use, and
follow all operating and safety instructions!
Technical specifications and outline are subject to change
without prior notice.
www.scilogex.com

Scilogex SK-R1807-E Specifications

General

Model	SK-R1807-E
Type	Rotary Evaporator
Capacity	5L
Voltage	220V
Power	1400W
Power Supply	220V
Temperature Range	Ambient +5°C to 180°C
Bath Temperature Range	Ambient +5°C to 180°C

Summary

Preface and Service

Preface

Welcome to the User Manual. Read carefully, follow instructions, and be aware of cautions when using the instrument.

Service and Support

Contact manufacturer support for technical assistance, providing serial number, problem description, and contact information.

Warranty Information

Instrument warranted for 24 months. Excludes damage from improper installation, misuse, or abnormal operation.

Safety Instructions

General Safety Guidelines

Read instructions, use trained staff, avoid moving parts, keep away from magnetic fields, and secure accessories properly.

Electrical and Environmental Safety

Ensure proper grounding, match voltage, operate in a safe environment, and avoid hazardous substances or water.

Operational Hazards and Precautions

Handle sample preparation safely, use standard accessories, and only allow experts to open the instrument.

Proper Use and Inspection

Proper Use Guidelines

Instrument designed for mixing sticky substances in schools, labs, and factories. Not for residential use or other constraints.

Receiving Inspection

Unpack carefully, check for transport damages, and contact support if any issues arise. Do not connect if damaged.

Control Features

Analog Model Controls

Overview of controls for Analog Rocking and 3D Shakers, including shaking table, speed knob, power light, switch, and interface.

LED Digital Model Controls

Details controls for LED Digital Rocking and 3D Shakers, including speed/time displays, mode switch, and parameter knob.

Operation Procedures

Analog Model Operation

Steps for operating analog models: place instrument, connect power, install platform, switch on, set speed, and switch off.

LED Digital Model Operation

Steps for operating digital models: place instrument, connect power, install platform, switch on, self-checking, set speed/timer.

Faults and Maintenance

Troubleshooting Faults

Common faults like instrument not working or motor speed issues, and checks for power cable connection and overload.

Maintenance and Cleaning

Guidelines for proper maintenance to prolong instrument life, including cleaning instructions and recommended cleansers.

Standards and Specifications

Standards and Regulations

Lists safety and EMC standards (EN 61010, UL 3101, EN 61326) and FCC compliance notes for the equipment.

Technical Specifications

Detailed specifications for Analog and LED Digital models, including voltage, frequency, motor ratings, dimensions, and protection class.

Order Information and Accessories

Order Information

Product catalog numbers and descriptions for various shaker models and configurations, including plug types and voltage.

Available Accessories

Catalog numbers and descriptions for accessories such as flask clips, roller attachments, and dish attachments.