436-GC/456-GC Service Manual Revision B February 2019
NOTE:
When installing Liquid Nitrogen outlet
tube into the 1/4Tx1/8PBR Male
connector make holes on the
outlet tube is upward prior to tightening.
Liquid Nitrogen outlet tube
PBR Male connecter
NOTE:
Install Teflon pipe (CP12059) fitting
threads prior to installation.
Turn 2.5 windings on the thread,
clockwise position.
Connect the connector to the OUT.
SWB4003
1/4”Brass Tee union
5700023500
Pressure relief valve