INCU-C Series V2018.1.1
11
4. Preparation and Start-up
n and
4.1 Connect the plug of power supply of the equipment with an independent
jack socket.
4.2 Turn on the master switch on the right side of the equipment, power is
applied to the unit, and the LCD displays the following in turn:
Time Function
Preset Temperature/Measured Temperature
Clean the chamber of incubator before you put it into use and on a regular base.
The interior should be wiped down with an appropriate disinfectant, such
as 70 % ISOPROPYL ALCOHOL or equivalent.
DO NOT USE ANY CHLORINATED OR HALOGEN MATERIAL-
AS THIS IS HARMFUL TO THE POLISHED STAINLESS STEEL!!!
To Next Page
Loading...