Need help?Do you have a question about the Scotchman CPO 350 and is the answer not in the manual?
Instructions and diagrams for safely moving the machine.
Specifies voltage, current, and wire gauge for electrical connections.
Procedures for powering on and initially operating the machine.
Steps for adjusting the blade guard on manual models.
Instructions for greasing pivot pins, oiling connections, and checking gear box oil.
Outlines recommended maintenance schedules based on operating hours or time intervals.
Step-by-step guide for installing saw blades on manual models.
Guidance on choosing the correct blade and setting spindle speed for materials.
Instructions on securely clamping workpieces in the vise for safe cutting.
Procedures for using and resetting the miter locking device for angled cuts.
Procedures for setting up and maintaining the power down feed system.
Steps for adjusting the stroke control for the power down feed.
Guide for adjusting the guard for power down feed machines.
Instructions for installing blades on power down feed machines.
Common issues and solutions for the power down feed system.
Common electrical issues and their solutions for the machine.
Reasons for blade breakage or dulling and how to prevent them.
To Next Page
General
