Need help?Do you have a question about the Scotchman SU-280 and is the answer not in the manual?
General| Model | SU-280 |
|---|---|
| Category | Saw |
| Type | Cold Saw |
| Voltage | 220V |
| Frequency | 60 Hz |
| Coolant System | Yes |
| Capacity at 90 Degrees (Round) | 80 mm |
| Capacity at 90 Degrees (Square) | 70 mm |
| Capacity at 45 Degrees (Round) | 60 mm |
| Capacity at 45 Degrees (Square) | 2 inches |
| Miter Capacity | 45° |
| Blade Diameter | 11 inches |
Lists relevant EU directives and EN standards for machine safety and construction.
Details the warranty terms and conditions offered by the manufacturer.
Provides fields for model, serial number, and manufacture year for machine identification.
Specifies the noise levels of the machine during operation.
Guide for selecting the appropriate band saw blade based on material size and tooth pitch.
Instructions on how to properly anchor the machine for stable operation and vibration reduction.
Details on connecting the machine to the power supply and verifying motor rotation.
Step-by-step guide for installing the band saw blade, including safety precautions.
Guidance on filling and using the correct cutting coolant to prevent damage and ensure performance.
Defines the intended use of the band saw and prohibits its use for other materials.
Explains how to adjust the machine's lowering stops and safety stop for cutting operations.
Lists common causes and checks for when the machine fails to start.
Identifies potential causes and solutions for poor cut quality or angled cuts.
Outlines reasons for premature blade wear and how to address them.
Lists possible causes for unusual noises during saw operation.
Explains how to troubleshoot issues with the hydraulic pressure gauge.
Detailed instructions for adjusting the cutting blade guides to ensure accurate cuts.
Step-by-step procedure for replacing worn guide plates on the band saw.
Provides a schedule for lubrication and checks, specifying types of grease/oil and frequency.
Lists essential safety checks and general rules to follow before and during operation.
Offers advice on repairs, maintenance, parts replacement, and contacting the manufacturer.
Describes material supply tracks and their availability in different lengths.
Details discharge tracks and their measuring systems (Quick-Loc, Multi-Loc).
Lists the technical specifications for the Scotchman SG Measuring System.
Provides schematic diagrams for the machine's electrical systems (three-phase and mono-phase).
To Next Page
