Need help?Do you have a question about the Scotsman MC 45 and is the answer not in the manual?
Details and operating requirements for the MC 15 electronic modular ice maker model.
Technical data, dimensions, and electrical specifications for the MC 15 ice maker.
Information on available accessories and physical dimensions for the ice maker unit.
Details and operating requirements for the MC 45 electronic modular ice maker model.
Technical data, dimensions, and electrical specifications for the MC 45 ice maker.
Overview of the Scotsman Modular Cubers, their design, and manual purpose.
Step-by-step guide for unpacking and inspecting the ice maker and storage bin.
Criteria and steps for selecting a location and levelling the ice maker and bin.
Instructions for stacking electronic and mixed unit modular cubers.
Guidelines for making electrical and water supply/drain connections.
A checklist of essential items to verify before operating the ice maker.
Diagram and steps illustrating proper installation procedures.
Steps to follow to safely power on and initiate the ice maker's operation.
Essential checks to perform during the initial operational phases.
Explanation of the internal water circulation and ice making process.
Detailed description of the refrigerant cycle during ice formation.
Explanation of the process for releasing and harvesting ice cubes.
Overview of how the system controls sequence through different cycles.
Charts illustrating component status during freezing, timed, and harvest cycles.
Description of evaporator sensor, condenser sensor, and ice bin level control.
Details on the P.C. Board, push button operation, and LED indicators.
Explanation of DIP switch settings, water spray, and water pump functions.
Description of solenoid valves, compressor, contactor, and regulating valves.
Procedure for adjusting the ice cube size by modifying DIP switch settings.
Steps for replacing evaporator, condenser, and ice level control sensors.
Instructions for replacing the P.C. Board, water pump, inlet valve, and hot gas coil.
Procedure for replacing drain valve, fan motor, drier, evaporator, and condenser.
Instructions for replacing water regulating valve and condensers.
Detailed steps for removing and replacing the compressor unit.
Electrical wiring diagram for MC-15 models with various voltage and phase configurations.
Electrical wiring diagram for MC-45 models with various voltage and phase configurations.
Diagnosing and resolving issues when the unit fails to start or compressor cycles.
Diagnosing small cubes, cloudy ice, and other ice quality problems.
Addressing water shortage, leaks, and water spilling problems.
Resolving issues with irregular ice, large cubes, and decreased ice capacity.
Diagnosing harvest failures, incorrect discharge pressure, and water in base.
General advice on maintenance periodicity and adaptation to local conditions.
Scheduled checks for water lines, levelling, and component condition.
Detailed steps for cleaning the water system using a specific cleaning solution.
General| Ice Type | Cube |
|---|---|
| Ice Shape | Cube |
| Ice Production | 45 lbs/24 hrs |
| Power Supply | 115V |
| Electrical | 115V, 60Hz, 1Ph |
| Weight | 130 lb |
| Condenser Type | Air Cooled |
To Next Page
