To Next PageTo Next Page
Need help?Do you have a question about the Scotsman MF 26 and is the answer not in the manual?
Provides an overview of the manual and the icemaker's features and design.
Details procedures for unpacking the icemaker and storage bin, and initial inspection.
Discusses selecting a location and ensuring the unit is level for optimal operation.
Outlines requirements and procedures for making electrical connections.
Explains how to connect water supply and drain lines for the unit.
Provides a checklist to ensure all installation steps are completed correctly.
Details the recommended practices for installing the ice maker unit.
Guides through the initial start-up procedure for the ice maker.
Details checks to perform during the unit's operation.
Explains how water flows through the machine for ice production.
Describes the path and function of the refrigerant in the system.
Details the mechanical components and their operation.
Describes the function and location of the evaporator temperature sensor.
Explains the water level sensor and its role in operation.
Details the condenser temperature sensor and its function.
Describes the electromagnetic sensors used for motor monitoring.
Explains the optical sensors that monitor ice levels in the chute.
Details how to adjust the water level in the freezing cylinder.
Provides steps for replacing the gear motor's magnetic sensor.
Outlines the process for replacing auger, seals, bearings, and coupling.
Details the procedure for replacing the entire gear motor assembly.
Explains how to replace the freezing cylinder.
Addresses issues where the unit fails to start or display any lights.
Diagnoses the situation where the bin full indicator is on without ice.
Troubleshoots the condition indicated by the yellow 'no water' LED.
Explains causes and solutions for the solid red alarm LED.
Addresses the blinking red alarm LED and its meaning.
Diagnoses reverse rotation with blinking yellow LED.
Troubleshoots reverse rotation indicated by a steady yellow LED.
Addresses the combined steady yellow and red LED indication.
Diagnoses blinking yellow and red LEDs.
Troubleshoots intermittent compressor cycling.
Identifies causes and solutions for reduced ice production.
Addresses issues related to the production of wet ice.
Troubleshoots the problem of the machine running without producing ice.
Identifies sources of water leaks and their solutions.
Addresses causes and solutions for excessive noise or chattering.
Explains causes of noise originating from the gear motor.
Diagnoses and resolves issues related to water shortage.
Provides general guidelines for maintenance and cleaning.
Details scheduled maintenance tasks for the icemaker.
Provides step-by-step instructions for cleaning the water system.
General| Refrigerant | R404A |
|---|---|
| Type | Modular |
| Ice Production | 26 lbs/24 hrs |
| Ice Type | Flake |
| Power Supply | 115V |
| Condenser | Air Cooled |
