EasyManua.ls Logo

SCOTT AIR-PAK 75i 4.5 - User Manual

SCOTT AIR-PAK 75i 4.5
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Page 1 of 44
P/N 595236-01 Rev. B 10/11
Typical configuration of SCOTT AIR-PAK 75i SCBA's shown.
Appearance of respirators may vary depending on optional and accessory equipment.
OPERATING & MAINTENANCE INSTRUCTIONS
SCOTT AIR-PAK
75i
Industrial Pressure-Demand
Self Contained Breathing Apparatus (SCBA)
Models
2.2 / 4.5
TYPICAL AIR-PAK 75i SCBA
© 2011 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety, AIR-PAK, PAK-ALERT, VIBRALERT, AV-2000, AV-
3000, and SURESEAL are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates.
WARNING
IMPROPER USE OF THIS RESPIRATOR MAY RESULT IN PERSONAL INJURY OR DEATH. IMPROPER USE IN-
CLUDES, BUT IS NOT LIMITED TO, USE WITHOUT ADEQUATE TRAINING, DISREGARD OF THE WARNINGS AND
INSTRUCTIONS CONTAINED HEREIN, AND FAILURE TO INSPECT AND MAINTAIN THIS RESPIRATOR. READ AND
UNDERSTAND ALL INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE OR SERVICE THIS EQUIPMENT.
THIS RESPIRATOR IS INTENDED TO BE USED ONLY IN CONJUNCTION WITH AN ORGANIZED RESPIRATORY
PROTECTION PROGRAM WHICH COMPLIES WITH THE REQUIREMENTS OF "PRACTICES FOR RESPIRATORY
PROTECTION," Z88.2 AVAILABLE FROM AMERICAN NATIONAL STANDARDS INSTITUTE INC., 1430 BROAD-
WAY, NEW YORK, N.Y., 10018, OR THE REQUIREMENTS OF OSHA SAFETY AND HEALTH STANDARD 29 CFR
1910 PARAGRAPH 134 AVAILABLE FROM THE U. S. DEPARTMENT OF LABOR, OCCUPATIONAL SAFETY
AND HEALTH ADMINISTRATION, OR OTHER PERTINENT NATIONALLY RECOGNIZED STANDARDS, SUCH
AS THOSE PROMULGATED BY THE U. S. COAST GUARD OR THE DEPARTMENT OF DEFENSE.
TRI-SLIDE
BUCKLE
AIR SAVER
SWITCH
PURGE
VALVE
REMOTE
PRESSURE
GAUGE
BREATHING
REGULATOR
CYLINDER
VALVE
Question and Answer IconNeed help?

Do you have a question about the SCOTT AIR-PAK 75i 4.5 and is the answer not in the manual?

Summary

Choosing the Appropriate SCBA Equipment

SCOTT AIR-PAK 75 i Model Specifications

HEADS-UP DISPLAY OPERATION

Facepiece Fitting and Fit Testing Procedures

Regular Operational Inspection

Inspection of the Breathing Air Cylinder

Covers the visual and hydrostatic inspection requirements for SCBA air cylinders.

Inspection of the Respirator

Outlines the inspection process for the complete respirator assembly, excluding the facepiece.

Facepiece Inspection

Details the thorough inspection process for the SCBA facepiece components.

Operational Testing

Describes the functional tests to verify the respirator's readiness for use.

Use of the SCBA Respirator

Donning and Preparation for Use

Covers the initial steps of preparing and donning the SCBA before entering a hazardous atmosphere.

Facepiece Donning Procedures

Provides detailed instructions on how to properly don the SCBA facepiece to ensure a secure seal.

SCBA Donning Problems and Solutions

Termination of SCBA Use

Resuming SCBA Use

RIC UAC Emergency Use

Emergency Operation Procedures

Low Temperature Operation Guidelines

Cylinder Replacement Procedure

Cleaning and Storage of SCBA

Storage of the Respirator

Periodic Testing Recommendations

Options and Accessories

Battery Replacement for SCBA Features

Cautions and Limitations for SCBA Use

Special or Critical Users Instructions

SCOTT AIR-PAK 75i 4.5 Specifications

General IconGeneral
BrandSCOTT
ModelAIR-PAK 75i 4.5
CategoryDiving Instrument
LanguageEnglish

Related product manuals