Operation of rear derailleur levers
Lever A (to change from a small sprocket to a larger
sprocket)
Lever A has a click stop at positions 1, 2, and 3.
1. To change one gear at a time. Example: from
3rd to 4th.
2. To change two gears at a time. Example: from
3rd to 5th.
3. To change three gears at a time. Example:
from 3rd to 6th.
Lever B (to change from a large sprocket to a smal-
ler sprocket. When lever B is pressed once, there is
one step change from a large to a smaller
sprocket).
Operation of front derailleur levers
Lever a (to change from a small chain-ring to a
larger chain-ring).
If operation of lever a does not complete the chain
ring change stroke, operate lever A again for the
distance "X”.
Lever b (to change from a large sprocket to a smal-
ler sprocket. When lever B is pressed once, there is
one step change from a large to a smaller
sprocket).
When lever b is operated, there is one click where
trimming (the noise preventing mechanism) enga-
ges and a second stronger click when the gear
change stroke is completed. After trimming, the
next (light) push to the right will complete the gear
change stroke to the smaller front chain-ring.
Lever B (shift to smaller chainring)
OWNER MANUAL
8-9
To Next Page
Loading...
