To Next Page

To Previous Page

check with your service provider to obtain the correct IP data. To enter these IP

data, browse through the following menus:

“IP address” ! “network mask” ! “gateway IP address” ! “DNS server IP

address”

Wi-Fi connection

1. Ensure that your Wi-Fi network is working properly (refer to the

“CONNECTIONS” section).

2. Browse through the following menus: “Set-up” ! “Internet

Connection” ! “Wi-Fi”. The unit will scan for all available

wireless networks and display their names.

3. Select the network and press the OK button to confirm.

4. The encryption security system (WEP or WPA) will be

detected. Enter the WEP or WPA code. In order to do so,

refer to previous section - BASIC OPERATIONS.

5. Press the

button to confirm.

Note: For both the Ethernet and Wi-Fi connection, the

message “Connection successful” will be displayed to confirm that the unit

is connected to the Internet. If this is not the case, “Connection failed” will

be displayed. In this case, enter the IP data and the WEP or WPA key

again and also make sure that the wired or wireless networks are

available and working.

Listening to a web radio station

After successfully connecting to the Internet, you can enjoy

the vTuner live Internet radio service by selecting “Internet

Radio”. The following options are available:

Options Descriptions

The unit can automatically detect the country in which the unit

is located and display the web radio stations in that country.

Country

The “Favorites” option allows you to find your favorite stations.

Favorites

This option allows you to select a country and then select a

web radio station in this country.

Location

This option allows you to choose a category: “News”,

“Comedy”, “Dance” and “Sports”. etc.

Format

New Stations

Select the new stations

that have been added since the last update.

SCOTT DXi 50 WL User Manual

Questions and Answers: