EasyManuals Logo

SCOTT Sigma 2 User Manual

SCOTT Sigma 2
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
SIGMA 2
5
The first breath version can be shut by
pressing a reset button on the DV and
opens when the wearer takes the first
breath. This permits the DV to be removed
from the face-piece while the cylinder valve
is open, without loss of cylinder air.
The bypass provides a constant flow of air
in the unlikely event that the regulator
malfunctions in a ‘no flow’ mode.
The bypass is opened by turning the knob
through 90°. As use of the bypass
consumes cylinder air rapidly, it must only
be used to escape from the hazardous
area.
2.6 FACEMASKS
SIGMA 2 is approved for use with: Vision
3, PanaSeal and PanaVisor full
facemasks, all of which conform to EN 136.
All are available with 5-point, fully
adjustable web or net head harnesses and
neck-straps. An inner mask minimises CO
2
dead space and visor misting. A speech
diaphragm is fitted.
Vision 3 Facemask with Head-harness
PanaSeal is suitable for medium and
smaller face sizes. PanaVisor is suitable
for medium to larger face sizes. Vision 3 is
available in three sizes: small, medium and
medium/large.
PanaSeal/PanaVisor Facemask with
Head-net
Vision 3 is moulded in grey silicone, while
PanaSeal and PanaVisor are non-
dermatitic black neoprene, or blue silicone.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SCOTT Sigma 2 and is the answer not in the manual?

SCOTT Sigma 2 Specifications

General IconGeneral
TypeSelf Contained Breathing Apparatus (SCBA)
ApplicationFirefighting, Industrial
Cylinder DurationVaries based on cylinder size and breathing rate
ApprovalEN 137
CompatibilityCompatible with various cylinders
FeaturesErgonomic design

Related product manuals