Operating - 12
OPERATING
3. Pull mower engagement lever (A) back to disengage.
4. Start engine and move throttle lever (B) to fast (
r
)
speed position.
5. Raise up off of seat, but do not get off tractor.
Result:
Engine should continue to run. If engine stops,
there is a problem with your safety interlock circuit.
Testing Park Brake Switch
1. Sit on seat.
2. Unlock the park brake.
3. Pull mower engagement lever (A) back to disengage.
4. Try to start engine.
Result:
Engine must not start. If engine starts, there is a
problem with your safety interlock circuit.
Testing Park Brake
1. Shut the engine off and lock the park brake (A).
2. Put transmission in N (neutral).
3. Try to push machine manually. Use free-wheeling lever
on units with an automatic transmission.
Result:
Park brake must prevent machine from moving. If
machine moves, parking brake needs to be adjusted.
Testing Reverse Implement Option (RIO)
1. Start engine.
2. Engage mower.
3. Look behind the vehicle to be sure there are no
bystanders.
4. Begin reverse travel by depressing reverse foot pedal for
Automatic transmission or moving gear shift lever to R
(reverse) position for Gear transmission.
Result:
Mower and engine should stop operation. If mower
or engine continues to operate as tractor begins travel in
reverse, do not continue to operate mower.
Using Park Brake
Locking park brake:
1. Push and hold brake pedal (A) down.
2. Move park brake lever (B) forward, then to the left to lock
position.
3. Release brake pedal. Pedal should stay down and park
brake lever should stay locked.
Unlocking park brake:
1. Push and hold brake pedal down.
2. Move park brake lever to the right, then to the rear.
3. Release brake pedal.
A
B
c
CAUTION: Avoid injury! Rotating blades are
dangerous. Children or bystanders may be
injured by runover and rotating blades.
Before backing up, carefully check the area
around the machine.
To Next Page
Loading...
Need help?
General
