Scotts S2046 User Manual

Service Intervals - 22
SERVICE INTERVALS
Service Intervals
Servicing Your Machine
Please use the following timetables to perform routine
maintenance on your machine.
Before Each Use
• Check fuel level.
• Check engine oil level.
• Clean air intake screen.
• Check safety systems.
• Check tire pressure.
• Check/tighten loose hardware.
After First 2 Hours
• Check blade belt tension.
After First 5 Hours
• Change engine oil.
Every 8 Hours
• Check engine oil level.
• Check brakes.
• Check tire pressure.
Every 25 Hours or Annually (whichever
comes first)
• Lubricate front wheel spindles and wheel bearings.
• Check/clean battery.
Every 25 Hours
• Sharpen/replace blades.
• Check and clean air cleaner element, (service more
frequently under dusty conditions).
• Change engine oil when operating under heavy load or
in high temperatures, (service more frequently under dusty
conditions).
• Check spindle brake measurement.
Every 50 Hours
• Change engine oil, (service more frequently under dusty
conditions).
Every 100 Hours
• Check/tighten loose hardware.
• Adjust drive belt tension.
• Replace oil filter.
• Check and clean air cleaner element, (service more
frequently under dusty conditions).
• Replace spark plug.
• Replace fuel filter.
Every Season
• Adjust blade belt tension.
• Check spindle brake measurement.
IMPORTANT: Avoid damage! Operating in extreme
conditions may require more frequent service
intervals:
• Engine components may become dirty or
plugged when operating in extreme heat, dust or
other severe conditions.
• Engine oil and spark plugs may lose efficiency if
vehicle is operated constantly at slow or low engine
speeds or with frequent short trips.

Scotts S2046 Specifications

General

Brand	Scotts
Model	S2046
Category	Lawn Mower
Language	English