Operating - 18
OPERATING
Using Mower Deck Mulch Ready (42-Inch
Mower Deck)
NOTE: For maximum mulching operation, it may be
necessary to change the mower blades, see Servicing
Mower Blades in the SERVICE MOWER section.
To set-up and operate the 42” deck for mulching operation
the factory installed mulch cover (A) must be installed.
1. Install mulch cover:
• Lift plastic discharge chute.
• Grasp corner of steel chute, pull outward to unlock
and pivot up.
• Install mulch cover into deck discharge opening and
hook both rubber hooks (B).
Using Mower Deck with Optional Equipment
(42-Inch Mower Deck)
NOTE: For maximum mower deck operation, it may be
necessary to change the mower blades, see Servicing
Mower Blades in the SERVICE MOWER section.
To set-up and operate the 42” deck for either the 2-Bag
Bagger or Mulch Plug Kit the factory installed mulch cover
(A) must be removed.
1. Remove mulch cover:
• Lift plastic discharge chute.
• Grasp corner of steel chute, pull outward to unlock
and pivot up.
• Unhook both rubber hooks (B) and remove mulch
cover.
2. Store mulch cover in a well protected area and have it
readily available for when you want to use deck as a
standard mulching deck.
Pushing Machine
1. Unlock the park brake (A).
2. Put transmission in N (neutral).
c
CAUTION: Avoid injury! Before you adjust
mower: STOP engine, remove key, and wait for
blades to STOP.
Be careful, sharp edges on mower blades.
Always wear gloves when handling mower
blades.
c
CAUTION: Avoid injury! Before you adjust
mower: STOP engine, remove key, and wait for
blades to STOP.
Be careful, sharp edges on mower blades.
Always wear gloves when handling mower
blades.
A
M96105
B
B
IMPORTANT: Avoid damage! Transmission damage
may occur if the machine is moved or towed
incorrectly:
• Move unit by hand only.
• DO NOT use another vehicle to move unit.
• DO NOT tow unit.
M96105
B
A
B
To Next Page
Loading...
Need help?
General
