Service Electrical - 42
SERVICE ELECTRICAL
Replacing Headlight Bulb
1. Turn bulb socket (A) 1/4 turn counterclockwise to
remove.
2. Replace defective bulb with a new bulb.
3. Insert bulb socket into housing, push in and turn 1/4 turn
clockwise to install.
Replacing Fuse
1. Park machine safely and lift hood. (See Parking Safely
in the Safety Section.)
2. Pull defective fuse(s) (A) out of socket(s).
3. Check metal clip in fuse window and discard fuse if clip
is broken.
4. Push new 15 Amp fuse into socket.
5. Lower hood.
A
To Next Page
Loading...
