Troubleshooting - 48
TROUBLESHOOTING
Electrical
Uneven Cut Mower not level.
Travel speed too fast.
Blades dull, bent or loose.
Mower gauge wheels not adjusted correctly.
Buildup of grass, leaves, and trash under mower.
Bent blade spindle.
Grass Tips Are Jagged And Turn Grayish Brown
After Mowing
Dull mower blades.
Bent blades.
Front-to-rear blade adjustment not set properly.
Mower Stops When Shift Lever Is Moved Rearward
and Mower Is Engaged (Hydrostatic)
Normal condition. (See Using Reverse Implement Option in the
OPERATING section.)
Mower Stops When Gear Shift Lever Is Moved To
The R (REVERSE) Position and Mower Is Engaged
(Gear)
Normal condition. (See Using Reverse Implement Option in the
OPERATING section.)
IF CHECK
Starter Does Not Work Or Will Not Turn Engine Brake pedal is not depressed.
Mower Engagement Lever is in ENGAGED position.
Battery terminals are corroded.
Battery not charged.
Lights Do Not Work Loose or burned out bulb..
Loose or damaged wiring.
Blown fuse.
Battery Will Not Charge Dead cell in the battery.
Battery cables and terminals are dirty.
Faulty regulator/rectifier.
IF CHECK
To Next Page
Loading...
