Assembly - 55
ASSEMBLY
• If tractor/mower deck is being set-up for side discharger
or 2-bag bagger DO NOT install mulch cover kit. (See
Using Mower Deck Side Discharge OR Using Mower Deck
with Optional Equipment in the Operating Mower section.)
Check Tire Pressure
1. Check tires for damage.
2. Check tire pressure with an accurate gauge.
3. Add or remove air, if necessary.
c
CAUTION: Avoid injury! Explosive separation
of tire and rim parts is possible when they are
serviced incorrectly:
• Do not attempt to mount a tire without the
proper equipment and experience to perform
the job.
• Do not inflate the tires above the
recommended pressure.
• Do not weld or heat a wheel and tire
assembly. Heat can cause an increase in air
pressure resulting in an explosion. Welding
can structurally weaken or deform the wheel.
• Do not stand in front or over the tire
assembly when inflating. Use a clip-on chuck
and extension hose long enough to allow you
to stand to one side.
To Next Page
Loading...
