Scotts S2348 User Manual

3/2/00
2 - 7
SPECIFICATIONS & INFORMATION
METRIC TORQUE VALUES
METRIC TORQUE VALUES
DO NOT use these values if a different torque value or
tightening procedure is given for a specific application.
Torque values listed are for general use only. Check
tightness of fasteners periodically.
Shear bolts are designed to fail under predetermined
loads. Always replace shear bolts with identical
property class.
Fasteners should be replaced with the same or higher
property class. If higher property class fasteners are
used, these should only be tightened to the strength of
the original.
Make sure fasteners threads are clean and that you
properly start thread engagement. This will prevent
them from failing when tightening.
Tighten plastic insert or crimped steel-type lock nuts to
approximately 50 percent of the dry torque shown in
the chart, applied to the nut, not to the bolt head.
Tighten toothed or serrated-type lock nuts to the full
torque value.
a
“Lubricated” means coated with a lubricant such as
engine oil, or fasteners with phosphate and oil coat-
ings.
“Dry” means plain or zinc plated without any lubrica-
tion.
4.8
8.8
9.8
10.9
12.9
510
12
Property
Class
and
Head
Markings
Property
Class
and
Nut
Markings
4.8
4.8
5
5
8.8
8.8
9.8
9.8
10.9
10.9
12.9
12.9
12.9
12
12
10
10
10
10
10
Size
Class 4.8 Class 8.8 or 9.8 Class 10.9 Class 12.9
Lubricated
a
Dry
a
Lubricated
a
Dry
a
Lubricated
a
Dry
a
Lubricated
a
Dry
a
Nm lb-ft Nm lb-ft Nm lb-ft Nm lb-ft Nm lb-ft Nm lb-ft Nm lb-ft Nm lb-ft
M6
4.7 3.5 6 4.4 9 6.6 11.5 8.5 13 9.5 16.5 12.5 15.5 11.5 19.5 14.5
M8
11.5 8.5 14.5 10.7 22 16 28 20.5 32 23.5 40 29.5 37 27.5 47 35
M10
23 17 29 21 43 32 55 40 63 46 80 59 75 55 95 70
M12
40 29.5 50 37 75 55 95 70 110 80 140 105 130 95 165 120
M14
63 46 80 59 120 88 150 110 175 130 220 165 205 150 260 190
M16
100 74 125 92 190 140 240 175 275 200 350 225 320 235 400 300
M18
135 100 175 125 265 195 330 245 375 275 475 350 440 325 560 410
M20
190 140 245 180 375 275 475 350 530 390 675 500 625 460 790 580
M22
265 195 330 245 510 375 650 480 725 535 920 680 850 625 108 800
M24
330 245 425 315 650 480 820 600 920 680 115 850 108 800 135 100
M27
490 360 625 460 950 700 1200 885 1350 1000 1700 1250 1580 1160 200 1500
M30
660 490 850 625 1290 950 1630 1200 1850 1350 2300 1700 2140 1700 2700 2000
M33
900 665 1150 850 1750 1300 2200 1625 2500 1850 3150 2325 2900 2150 3700 2730
M36
1150 850 1450 1075 2250 1650 2850 2100 3200 2350 4050 3000 3750 2770 4750 3500

Scotts S2348 Specifications

General

Brand	Scotts
Model	S2348
Category	Lawn Mower
Language	English