Need help?Do you have a question about the Scout Hub and is the answer not in the manual?
Register your Scout system to begin the installation process.
Install and test all Scout system devices.
Select your preferred monitoring service plan for the system.
Configure system modes and user permissions.
Confirm all included components are present in the packaging.
Connect the Scout hub to a power source.
Connect the Scout hub to your router via Ethernet.
Verify the Scout hub's network connection status.
Input the installation code provided with your shipment.
Wait for the Scout hub to successfully pair with the system.
Confirm successful hub pairing and complete installation.
Install sensors starting closest to the hub and working outwards.
Remove battery pull tabs one device at a time to avoid pairing errors.
Twist sensors gently to detach; pulling straight may damage surfaces.
Engage the motion sensor's battery by removing the pull tab.
Mount the motion sensor 5-6 ft. off the ground in a suitable location.
Prepare the motion sensor for adherence by removing adhesive backing.
Name your motion sensor and submit to complete setup.
Engage the door panel's batteries by removing the pull tabs.
Position the door panel pieces at shoulder height for optimal function.
Prepare the door panel for adherence by removing adhesive.
Adhere the door panel pieces, ensuring proper alignment and level placement.
Test the door panel by opening/closing and using key fobs.
Name your door panel and submit to finalize setup.
Engage the access sensor's battery by removing the pull tab.
Consider multiple configurations for placing the access sensor on windows or doors.
Prepare the access sensor for adherence by removing adhesive backing.
Adhere the access sensor pieces, ensuring proper alignment.
Name your access sensor and submit to complete setup.
Tap an RFID fob or sticker to the door panel to register.
Name the RFID device and write the name on the attached sticker.
Details regarding FCC compliance for the Scout device.
Statement regarding Industry Canada compliance for the Scout device.
Statement on IC radiation exposure limits and compliance.
List of approved antennas for the Scout device.
Statement regarding EU conformity for the Scout device.
General| Brand | Scout |
|---|---|
| Model | Hub |
| Category | Home Automation |
| Language | English |
To Next Page