Need help?Do you have a question about the SCREEN SERVICE SDT200UB and is the answer not in the manual?
General| Brand | SCREEN SERVICE |
|---|---|
| Model | SDT200UB |
| Category | Receiver |
| Language | English |
Explains the automatic switching control mechanism between incoming signal sources based on primary feed quality.
Provides guidance on how to update the ARK6 devices using the Java installer.
ETSI EN 302 755 compliant transmitter, key features include MPEG-2 TS inputs over ASI/Gigabit Ethernet, and Agile UHF output.
ETSI EN 300 744 compliant transmitter, key features include MPEG-2 TS inputs over ASI/Gigabit Ethernet, and Agile UHF output.
ARIB STD-B31:2005 compliant transmitter, key features include BTS inputs, MPEG-2 TS inputs, Agile UHF output, and offset frequencies.
ITU-R BT.470-6 compliant transmitter, key features include SDI inputs, Agile UHF output, and offset frequencies.
A/53 and A/153 compliant transmitter, key features include SMPTE-310M inputs, Agile UHF output, and offset frequencies.
Details specifications for ASI/SSI/SDI, TSoIP, RF, CVBS, Analog Audio, GPS, 10 MHz, 1PPS, and Linear Precorrection inputs.
Details specifications for RF, TSoIP, ASI Out Monitor, RF Mon, 10 MHz, and 1PPS outputs.
Details control interfaces: GbE 1, RS485, OPTO, Relays, and RS232, including pinouts.
IEC specifications, voltage, frequency, and mains consumption for ARK6 1U, 2U, and 3U models.
Describes the Tuner window for monitoring input channel, frequency offset, signal level, quality, and RF input demodulation parameters.
Explains the DVB-T2 window for managing specific configuration parameters and monitoring output signal level and quality.
Explains the Alarms window for setting alarm masks and monitoring alarm status, including notification destinations.
Details parameters for configuring the SNMP Manager: protocol version, Read/Set Community, Timeout, Retransmits, Port number.
To Next Page