ScubaJet Pro - Charging the SCUBAJET Batteries with the Battery Charger; Charging the Remote Control for Use on SUP

12 13
4.3. CHARGING THE SCUBAJET BATTERIES
WITH THE BATTERY CHARGER
4.4. CHARGING THE REMOTE CONTROL
FOR USE ON SUP
1 Put the battery in
vertical position on
the charger
2 As soon as the
battery is fully
charged the light
turns green.
1 Connect the USB cable to the standard USB outlet. 2 Put the remote in the middle of the charger until the light changes
from red to blue. Only when the light turns blue it starts to charge.