SCUF Envision | 22 Quick Start Manual | English
TRIGGERS:
The triggers section allows you to configure how your trigger behaves when
pressing it. You can use the available presets or create your own preset to
configure them.
To create your own preset press the “+” button.
Next, choose a preset “curve response” for the desired trigger you want
to configure.
You can also create your own curve response but selecting the “Custom” tab.
You can fine tune your curve response by clicking and dragging the white
dots to your preference.
Please note that the X axis represents how much the trigger is pressed and
the Y axis represents the activation value of the trigger. You can tune the
values of the trigger at 20%, 40%, 60%, 80%, and 100% trigger depression.
You are also able to tune the deadzones of the trigger. To do this, adjust the
deadzone slider, located at the bottom of the graph, for the desired trigger.
Please note that adjusting your deadzones below 2% may cause unintended
trigger movement in-game or within menus. Having a large deadzone
will mean that you have to press the trigger much more before a game
recognizes the trigger movement.
To Next Page
Loading...
