Operation & Maintenance Manual──LG968 /969Wheel Loader
18
5.4 Never Drive Over-Speed
z Know the characters of loader， follow the actual condition at working area, drive at proper speed.
Select path of drive and method of machine to let the others know.
z Keep low speed so as to control easily at any time.
z Never drive fast, turn and brake suddenly at rugged, slippery or oblique ground.
z Drive at low speed when pass rough or rugged ground with blocks around, which may let the
control of steering wheel difficult. Loader may turn over if operate wrong.
z Let the engine run smoothly, never drive at high speed.
5.5 Ensure Good Visibility
z Slow the speed and sound the horn when necessary to let others know or find a director when the
visibility is bad or at the narrow crossing.
z Sand dust, big fog or storm may affect visibility. Slow the speed when visibility is bad. When
visibility is not good, stop work until good weather.
z Drive carefully when take long part which may block the visibility. Carefully lift, go forward and
backward, change speed. Never let the people get
into the working space or find specific director.
z Keep the light on and drive at proper speed during
night which may produce illusion for height of
ground.
z Keep the front and rear head light and working light
on when working at dark area.
5.6 Pay Attention to Blocks
z If there are blocks (roof of buildings or the upper of door), never run into materials to be loaded
when turn the direction or pass.
z Pay attention to the environment when pass or turn at narrow area. Slow the speed to make sure
there is no block.
z Operate carefully when the ground is bad and load is not stable to prevent unstable load.
To Next Page
