Operation & Maintenance Manual──LG968 /969Wheel Loader
75
prevent cold crack. If antifreeze is added, please follow the descriptions on the nameplate of
antifreeze.
After cold weather:
After the weather is warm, the relative parts should reuse the proper mobile oil, fuel and hydraulic oil
that are compliant with the temperature.
3.6 Oil and Fuel Supplying
3.6.1 Fuel Supplying of Engine
① Fuel Level Checking
△
! NOTICE
Oil level checking must be executed 15 minutes before working or after
engine stopping.
z Park the machine on plane ground, put transmission lever at neutral (“N”) position, push the
parking brake switch, put blocks at front and back of tire.
z Open the side door at right side of engine cover.
z Pull the dipstick out, and wipe it clean with cloth. Insert the dipstick back, and pull it out again to
check the oil level (repeat twice at least).
z The oil is proper, if the oil level is between scale “Static Full” and “Add” of dipstick. If the oil
level is below scale “Add”, it needs to add some mobile oil from oil inlet.
NOTICE: If the machine is running at idle state, check the scale of the other side of dipstick, it is
proper if the oil level is between scale “Static Full” and “Add” of dipstick. If the oil level is below
scale “Add”, it needs to add some mobile oil from oil inlet.
To Next Page
Loading...
