Do you have a question about the SDMO 6500 TE and is the answer not in the manual?
Read manual carefully, adhere to safety, usage, and maintenance instructions.
Explains warning symbols, danger signs, and identification plates on the generating set.
Provides essential operating instructions and crucial safety rules for user protection.
Choose a clean, well-ventilated site and place the set on a flat, horizontal surface.
Details the necessity and method of connecting the generating set to the ground for safety.
Essential checks for oil, fuel, air filter, and battery before starting the engine.
Covers procedures for starting the engine, including electric and manual methods, and operating the set.
Procedure for safely shutting down the generating set after use.
Explains the role of circuit breakers in protecting against overload and short circuits.
Details the automatic engine stop function triggered by low oil level or pressure.
Provides a schedule for routine maintenance tasks based on usage intervals.
Regularly inspect and tighten all nuts, bolts, and screws to prevent faults.
Step-by-step guide for draining old oil and refilling with recommended oil.
Instructions for safely draining fuel and replacing the fuel filter.
Identifies probable causes and solutions for the engine failing to start.
Addresses issues related to the absence of electrical output and potential causes.
Explains reasons for circuit breakers tripping and how to resolve them.
Lists technical details such as model, output, engine type, and dimensions.
Provides guidance on selecting appropriate cable sizes based on current and length.
Manufacturer's declaration of compliance with relevant EU directives.
Read manual carefully, adhere to safety, usage, and maintenance instructions.
Explains warning symbols, danger signs, and identification plates on the generating set.
Provides essential operating instructions and crucial safety rules for user protection.
Choose a clean, well-ventilated site and place the set on a flat, horizontal surface.
Details the necessity and method of connecting the generating set to the ground for safety.
Essential checks for oil, fuel, air filter, and battery before starting the engine.
Covers procedures for starting the engine, including electric and manual methods, and operating the set.
Procedure for safely shutting down the generating set after use.
Explains the role of circuit breakers in protecting against overload and short circuits.
Details the automatic engine stop function triggered by low oil level or pressure.
Provides a schedule for routine maintenance tasks based on usage intervals.
Regularly inspect and tighten all nuts, bolts, and screws to prevent faults.
Step-by-step guide for draining old oil and refilling with recommended oil.
Instructions for safely draining fuel and replacing the fuel filter.
Identifies probable causes and solutions for the engine failing to start.
Addresses issues related to the absence of electrical output and potential causes.
Explains reasons for circuit breakers tripping and how to resolve them.
Lists technical details such as model, output, engine type, and dimensions.
Provides guidance on selecting appropriate cable sizes based on current and length.
Manufacturer's declaration of compliance with relevant EU directives.
| Type | Portable Generator |
|---|---|
| Fuel | Unleaded Gasoline |
| Voltage | 230 V |
| Frequency | 50 Hz |
| AVR | Yes |
| Maximum Power (LTP) | 6.5 kVA |
| Engine Type | Air-cooled, 4-stroke, OHV |
| Fuel Type | Gasoline |
| Runtime at 50% Load | 8 hours |
| Starting System | Recoil |
| Phase | Single Phase |
| Noise Level | 72 dB(A) at 7 m |












Loading...