Overview of the e-bike and components
Display
Shifter
Removable Li-ion Battery
Tires
Rear Suspension
Disc Brake
Wheel
Derailleur
Motor
Foldable Pedals
Frame
Adjustable Stem
Saddle
Frame Hinge
Stem Hinge
Headlight
Battery Controls (left side)
Adjustable Seat Post
Operating the folding mechanism
Loosen the clamp by the handlebar hinge and fold the handlebar.
Hold the knob under the frame, loosen the clamp by the frame hinge, and fold the
bike frame in half.
Press the pedals inward and then push them up 90° to fold.
1.
2.
3.
1.
Operating the display
Value increase key (“+”)
Value decrease key (“-”)
Power on/off key
Function key (“i”)
Electric assist level
Battery level
Headlight indicator
Current speed
Trip odometer display
Customizable function display
Motor power indicator
Before turning on the display, ensure battery power is on by pressing the button on
the battery on the left side of the bike.
Turn the display on/off: press power on/off key to turn on. Long press power on/off
key to turn off. Note: the display will turn off automatically after 10 minutes of
inactivity.
Using the display
Switch electric assist level: press “+”and “-”keys to cycle electric assist levels.
Switch display mode: press “i” key to cycle display modes between odometer
(ODO), maximum speed (MAX), average speed (AVG), and trip time (TIME).
Walking mode: press and hold “-” key. Release to exit walking mode. (Note: walking
mode activates the bike’s motor at a steady 3.7mph (6km/h) so that you can walk
alongside it).
Turn on the headlight: long press “+” key for 2 seconds. Long press again to turn the
headlight off. (Note: turning on the headlight also puts the display into nighttime
mode with reduced screen brightness).
2.
3.
4.
5.
To Next Page
Loading...