Need help?Do you have a question about the SE Electronics sE2200 and is the answer not in the manual?
General| Type | Studio microphone |
|---|---|
| Sensitivity (1kHz) | 23.7 mV/Pa |
| Microphone frequency | 20 - 20000 Hz |
| Equivalent noise level | 8 dB |
| Microphone sensitivity | 145 dB |
| Microphone direction type | Cardioid |
| Microphone input impedance | 50 Ω |
| Recommended load impedance | 1000 Ω |
| Signal-to-Noise Ratio (SNR) | 86 dB |
| Device interface | mini XLR (3-pin) |
| Connectivity technology | Wired |
| Plug and Play | Yes |
| Product color | Black |
| Input voltage | 48 V |
| Package type | Box |
| Number of products included | 5 pc(s) |
Weight and Dimensions| Width | 51 mm |
|---|---|
| Height | 215 mm |
| Microphone weight | 611 g |
Expresses gratitude for purchasing the sE microphone and introduces the manual.
Details the sE2200's features, sound quality, and applications as a high-quality condenser mic.
Lists the items included in the packaging, advising contact if anything is missing.
Reduces signal by 10 or 20 dB for loud sources or close-miking to prevent distortion.
Filters low frequencies at 80Hz or 160Hz to reduce noise and proximity effect.
Specifies the need for 48V phantom power and warns about incorrect power sources.
Emphasizes checking connected equipment safety regulations and ground lead for safe operation.
Provides instructions on how to clean and store the microphone after use.
Lists detailed technical data of the sE2200 microphone, including polar patterns and frequency response.
Guides users on contacting dealers for service and assistance with the sE product.
Provides company contact details, website, and email for inquiries and support.
Instructs users on how to register their sE product to extend the warranty period.
To Next Page
