Need help?Do you have a question about the SE Electronics Z5600a II and is the answer not in the manual?
Lists included items like microphone, cable, shockmount, power supply, and IEC cable.
Reduces incoming signal by 10dB to prevent distortion and clipping at high sound pressure levels.
Inserts a 50Hz low-cut filter to reduce plosives, footfall, rumble, and proximity effect.
Selects 9 polar patterns from omnidirectional to cardioid to figure-8, tailoring sound pickup.
Warns against connecting to unauthorized power supplies or applying phantom voltage.
Instructs to clean the microphone with a dry, soft cloth and store it in its case.
Provides contact details for sE Electronics International, Inc. and website links for support and dealers.
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Impedance | 200 Ohms |
| Power Requirement | 48V Phantom Power |
| Diaphragm Size | 1 inch |
| Connector | XLR |
| Signal-to-Noise Ratio | 78 dB |
| Type | Condenser |
| Polar Patterns | Cardioid |
| Equivalent Noise Level | 16 dB |
To Next Page
