81
Carburetor/Throttle Body and Oil
Injection Pump
Lubricate springs, shafts and exposed
portion of cables.
NOTE: Grease carburetor linkage with
synthetic grease (on twin-carburetor
models).
TYPICAL
Reverse Gate
Lubricate pivoting points and mecha-
nism.
Periodic Inspection
Routine maintenance is necessary for
all mechanized products. A periodic in-
spection contributes to the product’s
life span.
The following maintenance chart gives
guidelines for regular watercraft ser-
vicing scheduled to be performed by
you and/or by an authorized Sea-Doo
dealer. The schedule should be adjust-
ed according to operating conditions
and use.
IMPORTANT: Schedule for watercraft
rental operations or higher number of
hour use, will require greater frequen-
cy of inspection and maintenance.
F01F07Y
smo2001-003a.book Page 81 Wednesday, August 30, 2000 1:25 PM
To Next Page
Loading...
Need help?
General