107
LLHH AACCCCEESSSS CCOOVVEERR
1. To lock, turn the knob 1/4 turn
counterclockwise
NNOOTTEE::
A cooling system that frequently re-
quires coolant is an indication of leaks
or engine problems. See an author-
ized Sea-Doo dealer.
EEnnggiinnee CCoooollaanntt RReeppllaacceemmeenntt
Coolant replacement should be per-
formed by an authorized Sea-Doo
dealer.
SStteeeerriinngg AAlliiggnnmmeenntt
1. Manually release and remove the
LH side knee pad.
NNOOTTEE::
This area is intended only to access
the steering cable assembly. Do not
use this area for storage purposes.
1. LH Side knee pad
2. Unclip the steering cable by push-
ing the ring up towards the nut.
SSTTEEEERRIINNGG CCAABBLLEE UUNNCCLLIIPPPPEEDD
1. Ring
2. Nut
3. Put the jet pump nozzle in straight
position.
4. Unscrew nut to turn handlebar to
the right.
5. Screw nut to turn handlebar to the
left.
6. When steering alignment is com-
plete, clip the steering cable by
pushing the ring back down and
reinstalling the LH side knee pad.
CCeennttrraall BBooddyy
CCeennttrraall BBooddyy RReemmoovvaall
When necessary, remove the central
body as follows:
WWAARRNNIINNGG
NNeevveerr aatttteemmpptt ttoo lliifftt tthhee cceennttrraall
bbooddyy aalloonnee.. LLiifftt oonnllyy wwiitthh aassssiiss--
ttaannccee oorr uussee aann aapppprroopprriiaattee lliiffttiinngg
ddeevviiccee.. LLiiffttiinngg aalloonnee ccaann ccaauussee
sseerriioouuss iinnjjuurryy..
1. Turn the LH access cover knob 1/4
turn clockwise, then pull out to un-
snap the rear portion and slide
rearward to remove.
MAINTENANCE PROCEDURES