SEA ARM - Release System Operation

Sistemi elettronici
di Aperture Porte e Cancelli
ARM
FITTING AND CONNECTION INSTRUCTIONS
RELEASE SYSTEM
To release operate as follows:
- Turn the release door and insert the furnished hexagonal T-key into the special hole (Fig. 14)
- Turn the release key about 180° clockwise (Fig. 15).
- Extract the key and close the door
- Open manually the leaf
To block again operate as follows:
- Insert the hexagonal key and turn it about 180° anticlockwise
- Move the leaf manually to allow the re-coupling of the gear before using in automatic.
- Extract the key and close the door
Fig. 14
180°
Fig. 15
UNLOCK
ENGLISH
REV 05 - 10/2007