5
| Page 30 | SEABOB Operator's Manual |
5.3 Operating the SEABOB
Never run the motor out of the water for longer than
approx. 10 seconds. The motor seals and the hard-coated
motor shaft are designed exclusively for use in the wa-
ter. Operation out of the water can lead to overheating
due to the lack of water to cool the device, thereby caus-
ing irreparable damage to the seals and motor shaft.
Danger of short circuit!
5.3.1 Controls and Display panel
1. Green button = plus button or scroll up
2. Red button = minus button or scroll down
3. Silver button = select button or move the cursor to
the right
4. Blue button = select button or move the cursor to the
left
5. Trigger = motor enable (on / off), power control,
confirm button
6. Multi-color, graphic Display Screen with adjustable
background brightness and contrast setting
To Next Page
Loading...
