8
| Page 62 | SEABOB Operator's Manual |
Depth gauge
• Built-in diving gauge with integrated, seawater-
resistant ceramic sensor
• Temperature compensated
• Compares zero point and final value
• Air pressure is equalized before scuba diving (re-
set when switching on the SEABOB)
Care
No special maintenance is required if the care instruc-
tions are adhered to (cleaning of the device and pos-
sible replacement of wearing parts)
Recommended: Have the SEABOB (for example, the
motor sealing case) checked by the manufacturer or
specialist dealer after approx. 3,000 hours of motor
operation
Impact on the environment
Emission-free and quiet operation
To Next Page
Loading...
