10
PRODUCTS TO BE USED WITH CAUTION ON POLYTEC
SURFACES
While it is impossible to test every product used in every region of the world, some common ones are
known to be compatible with Polytec.
These products are safe when used under controlled conditions, as per manufacturer’s instructions.
NOTICE
– Always follow the manufacturer’s instructions.
– Do not leave raw product on surfaces for an extended period of time. Wipe up immediately after
application.
– If using other products, always test on a hidden area before use.
Be careful when using the following care products on Polytec hulls and decks:
– 3M™ Marine Cleaner and Wax
– Meguiar’s® Gold Class™ Carnauba Wax
– Dish soap
– Fabuloso® All-Purpose Cleaner Liquid Solution
– Fantastik® Original All Purpose Cleaner
– Kleen-Flo Glass Kleen
– R-M® 900 Pre-Kleano
– WD-40®
To Next Page
Loading...
