Revision 2012.02.27
2
INTRODUCTION
Congratulations on the purchase of your vending machine. This vending machine has been designed to give you many years of
dependable service. It requires little maintenance and is easy to set up and operate.
READ THIS MANUAL COMPLETELY
Your vending machine is designed to operate simply and reliably, but to take full advantage of your vendor, please read this owner’s
manual thoroughly. It contains important information regarding installation and operations, as well as a brief trouble-shooting guide.
EQUIPMENT INSPECTION
After you have received your vendor and have it out of the box, place it on a secure surface for further inspection. Note: Any damages
that may have occurred during shipping must be reported to the delivery carrier immediately. Reporting damages and the seeking of
restitution is the responsibility of the equipment owner. The factory is willing to assist you in this process in any way possible. Feel free
to contact our Customer Care Department with questions you may have on this process.
It is important that you keep the original packaging for your vending machine at least through the warranty period. If your machine
needs to be returned for repair, you may have to purchase this packaging if it is not retained.
Once you have your vendor located, we suggest that you keep this manual for future reference, or you can view this manual online at
www.seagamfg.com
. Should any problems occur, refer to the section entitled “COMMON QUESTIONS AND ANSWERS”. It is designed
to help you quickly identify a problem and correct it.
Seaga Manufacturing, Inc.
700 Seaga Drive
Freeport, IL 61032 U.S.A.
www.sea
amf
.com
Seaga UK Ltd.
Unit 8, Caebach, Off Builders Street
Llandudno North Wales LL30 1DR
www.sea
a.co.uk
For Service and Customer Care:
8:30 a.m. - 4:00 p.m. CST. Mon thru Fri
815.297.9500 ext 160
815.297.1758 Fax
email: customercare@seagamfg.com
For Service and Customer Care:
9:00 a.m. - 5:30 p.m. Mon thru Fri
+44(0)1492 874010
+44(0)1492 874644 Fax
email: info@seaga.co.uk
To Next Page
Loading...
