Seagate 1200 SSD - Scsi Commands Supported

SEAGATE 1200 SSD PRODUCT MANUAL, REV. A 53
11.3 SCSI COMMANDS SUPPORTED
Table 15 lists the SCSI commands supported by Seagate 1200 SSD drives.
Table 15 Supported commands
COMMAND NAME COMMAND CODE SUPPORTED
CHANGE DEFINITION 40h N
FORMAT UNIT [1] 04h Y
DPRY bit supported N
DCRT bit supported Y
STPF bit supported Y
IP bit supported Y
DSP bit supported Y
IMMED bit supported Y
VS (vendor specific) N
INQUIRY 12h Y
Block Limits page (B0h) Y
Block Device Characteristics page (B1h) Y
Date Code page (C1h) Y
Device Behavior page (C3h) Y
Device Identification page (83h) Y
Extended Inquiry Data page (86h) Y
Firmware Numbers page (C0h) Y
Jumper Settings page (C2h) N
Power Conditions page (8Ah) Y
Power Consumption page (8Dh) Y
Supported Vital Product Data page (00h) Y
Thin Provisioning page (B2h) Y
Unit Serial Number page (80h) Y
Vendor Unique page (D1h) Y
Vendor Unique page (D2h) Y
LOG SELECT 4Ch Y
PCR bit Y
DU bit N
DS bit Y
TSD bit Y
ETC bit N
TMC bit N
LP bit N
LOG SENSE 4Dh Y
Application Client Log page (0Fh) Y
Background Scan Results log page (15h) Y
Buffer Over-run/Under-run page (01h) N
Cache Statistics page (37h) Y
Factory Log page (3Eh) Y