Seagate Barracuda - Page 34

34 Barracuda SATA Product Manual, Rev. G
SATA Interface www.seagate.com
59 Number of sectors transferred during a Read Multiple
or Write Multiple command
xxxx
H
60–61 Total number of user-addressable LBA sectors available
(see Section 2.2 for related information)
*Note: The maximum value allowed in this field is:
0FFFFFFFh (268,435,455 sectors, 137GB). Drives with
capacities over 137GB will have 0FFFFFFFh in this field and
the actual number of user-addressable LBAs specified in
words 100-103. This is required for drives that support the
48-bit addressing feature.
0FFFFFFFh*
62 Retired 0000
H
63 Multiword DMA active and modes supported
(see note following this table)
xx07
H
64 Advanced PIO modes supported (modes 3 and 4
supported)
0003
H
65 Minimum multiword DMA transfer cycle time per word (120
nsec)
0078
H
66 Recommended multiword DMA transfer cycle time per
word
(120 nsec)
0078
H
67 Minimum PIO cycle time without IORDY flow control (240
nsec)
0078
H
68 Minimum PIO cycle time with IORDY flow control (120 nsec) 0078
H
69–74 ATA-reserved 0000
H
75 Queue depth 001F
H
76 SATA capabilities xxxx
H
77 Reserved for future SATA definition xxxx
H
78 SATA features supported xxxx
H
79 SATA features enabled xxxx
H
80 Major version number 01F0
H
81 Minor version number 0028
H
82 Command sets supported 364B
H
83 Command sets supported 7F09
H
84 Command sets support extension
(see note following this table)
4163
H
85 Command sets enabled 30xx
H
86 Command sets enabled BE09
H
87 Command sets enable extension 4163
H
88 Ultra DMA support and current mode (see note following
this table)
xx7F
H
89 Security erase time 0039
H
90 Enhanced security erase time 0039
H
Table 11 Identify Device commands (continued)
Word Description Value