Seagate ST1000DM003 - User Manual

Need help?

Do you have a question about the Seagate ST1000DM003 and is the answer not in the manual?

Summary

Provides a quick reference for drive specifications including capacity, density, and transfer rates.

Details the formatted capacity and guaranteed sectors for the drive models.

Details power consumption modes, requirements, and conducted noise levels.

Lists power requirements for spinup, idle, operating, standby, and sleep modes.

Covers ambient temperature, temperature gradient, humidity, and altitude.

Specifies the operating and non-operating ambient temperature ranges for the drive.

Details operating and non-operating shock levels the drive can withstand.

Specifies the maximum operating shock levels (70 Gs) the drive can tolerate during read operations.

Specifies the non-operating shock levels (300-350 Gs) the drive can withstand without damage.

Details annualized failure rate, nonrecoverable read errors, and rated workload.

Outlines essential precautions for safe handling and preventing electrostatic discharge (ESD) damage.

Provides instructions and precautions for mounting the drive, including screw types and clearances.

Details the Identify Device command (EC H) and the information it transfers about the drive.

Describes S.M.A.R.T. for failure prediction and lists the S.M.A.R.T. command codes used by the drive.

General

Type	HDD
HDD size	3.5 \
HDD speed	7200 RPM
Interface	Serial ATA III
HDD capacity	1000 GB
HDD number of heads	2
Storage drive buffer size	64 MB
HDD interface transfer rate	6 Gbit/s
HDD sustained transfer rate	210 MiB/s
Operating voltage	5 / 12 V
Power consumption (idle)	4.6 W
Power consumption (typical)	5.3 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 60 °C
Sustainability certificates	RoHS
Storage drive adapter included	No
Harmonized System (HS) code	84717050