Need help?Do you have a question about the Seagate ST1000VM002 and is the answer not in the manual?
Details the advantages and features of the Serial ATA interface for connectivity.
Provides a quick reference table of key drive specifications.
Covers formatted capacity, LBA mode, and default logical geometry.
Details recording methods, interface type, and transfer rates.
Lists physical dimensions, weight, seek times, and start/stop times.
Outlines power consumption, voltage tolerance, and management modes.
Specifies operating temperature, humidity, altitude, and gradient.
Details the drive's durability against shock and vibration.
Covers noise levels, electromagnetic immunity, and radio frequency environments.
States Annualised Failure Rate, warranty, and agency certifications.
Covers RoHS compliance and corrosive environment precautions.
Guidelines for safely handling the drive to prevent ESD damage.
Covers drive configuration, SATA cables, and connectors.
Instructions and precautions for physically mounting the drive.
Explains the drive's support for hot-plugging.
Details the pin assignments for the Serial ATA interface connector.
Lists the ATA commands supported by the drive.
Provides detailed information about the Identify Device command.
Explains how the Set Features command controls drive features.
Describes the S.M.A.R.T. commands for drive health monitoring.
General| Capacity | 1 TB |
|---|---|
| Interface | SATA 6 Gb/s |
| Cache | 64 MB |
| RPM | 5900 RPM |
| Power Consumption (Operating) | 6.8W |
| Load/Unload Cycles | 600, 000 |
| Warranty | 3 years |
| Non-Recoverable Read Errors per Bits Read | 1 per 10E14 |
To Next Page